Black Coated Wire Rope for Hanging and Utility Assemblies
This product combines a fine stainless steel wire-rope core with a smooth black polymer coating. It is supplied on small or bulk reels for cutting and assembly into project-specific lengths. The black exterior suits installations where a dark, low-visibility cable is preferred and reduces direct contact with the metallic strand surface.
The supplied photographs show different reel formats and a fine helical profile beneath the coating. They do not establish a universal load rating, coating compound or strand construction. These details must be confirmed against the intended assembly and termination method.
Specifications to Confirm
| Item | Details for quotation |
|---|---|
| Core material | 304 stainless steel is listed in the supplier reference. Confirm the required grade, material standard and documentation. |
| Coating | Black polymer coating is visible. Specify the required compound, color, thickness, hardness and environmental exposure. |
| Diameter | A supplier comparison image references 0.8, 1.5, 2.0, 3.0, 4.0 and 5.0 mm samples. Confirm whether the required dimension is coated outside diameter or metallic core diameter. |
| Rope construction | State the strand and wire arrangement, lay direction and flexibility requirement rather than ordering by outside diameter alone. |
| Supply format | Specify reel length, cut lengths, coil or reel packaging, labeling and allowable joints. |
| Termination | Define loops, sleeves, ferrules, clamps, end stops or bare cut ends, including whether coating is removed at the termination. |
| Inspection | Confirm checks for diameter, coating continuity, reel length, surface condition and any required proof or tensile test. |
Diameter and Construction Selection
The coated outside diameter controls fit through guides, holes and fittings, while the metallic core and strand construction control flexibility and mechanical performance. State both dimensions when possible. A larger coated diameter does not by itself establish a higher working load.
For routed assemblies, include the minimum bend radius, pulley or guide diameter and expected number of flexing cycles. Very tight bends can damage the coating or accelerate strand fatigue. Safety factors and working-load limits must be set by the assembly designer from verified cable data and the complete termination system.
Coating and Termination Considerations
The correct coating material depends on temperature, ultraviolet exposure, moisture, chemicals, abrasion and required flexibility. State whether the cable will be used indoors, outdoors or in a greenhouse or process environment. Color and coating thickness should be confirmed from an approved sample when appearance is important.
Crimp sleeves, clamps and end fittings must match the core diameter and cable construction. Coating trapped inside a crimp can affect retention, while removing it can expose the core. Provide the intended fitting and assembly method so the termination can be reviewed.
Typical Applications
- Advertising signs and suspended display elements
- Picture hanging and decorative cable systems
- Greenhouse support and general utility lines
- Non-lifting tethers, guides and light cable assemblies
This page does not assign the cable to lifting, fall-protection or other safety-critical service. Such uses require application-specific standards, certified ratings and approved end terminations.
Quality Control and Ordering
Inspection can cover core identification, coated diameter, coating continuity, strand condition, reel length and packaging. Any tensile, adhesion, salt-spray, ultraviolet or chemical-resistance test must be defined with its method and acceptance criteria before production. See our quality control information.
Frequently Asked Questions
Is the listed diameter the cable core or the coated outside diameter?
It must be confirmed for the selected item. Send both the required core diameter and finished outside diameter to avoid a mismatch with fittings.
Can the cable be supplied in cut lengths?
Reel and cut-length supply can be reviewed. State the length tolerance, quantity, end condition, labeling and packaging needed.
Is this cable suitable for lifting?
No lifting rating is established by these photographs. Lifting or safety-critical use requires a verified construction, certified capacity, appropriate safety factor and approved terminations.
Request a Coated Wire Rope Quote
Send the core material, strand construction, core and coated diameters, coating compound and color, reel or cut length, termination details, quantity, service environment and destination.
