T-Handle Screws for Manual Fastening
The transverse round grip provides a hand-operated interface for turning the threaded shank. This format can suit assemblies that need repeated manual adjustment, provided the selected thread, engagement and grip envelope match the mating part. The images illustrate the configuration rather than a dimensional drawing or inspected production sample.
Reference Specifications and Selection
| Parameter | Reference and order requirement |
|---|---|
| Product type | Externally threaded T-handle clamping bolt / hand screw |
| Material | 304 stainless steel in the supplier reference. Confirm grade and any required material documentation with the quotation. |
| Construction | Reference describes a welded T-grip and shank. Joint geometry and production requirements must be agreed on the drawing. |
| Thread-size references | M4 shown in reference options; M5, M6, M8, M10 and M12 listed in the reference title. Confirm availability, pitch, handedness and tolerance class for the chosen item. |
| Length references | M4 × 20 and M4 × 25 appear in the supplied reference. Confirm how length is measured and the usable threaded length; illustrations are not to scale. |
| Handle geometry | Transverse cylindrical grip. Specify grip length, diameter, end treatment and clearance around the assembly. |
| Shank end | End shape and chamfer requirements to be specified; do not infer exact details from the illustration. |
| Surface | Bright metallic appearance illustrated. Actual finish and cosmetic acceptance criteria require confirmation. |
| Performance and accessories | No clamping-force, torque or load rating established. Mating nuts, washers and other accessories are not included by implication. |
Check the Thread and Handle Envelope
- Mating thread: Supply the thread designation and pitch, not only a nominal diameter.
- Usable length: Identify the threaded length, engagement requirement and available depth in the mating component.
- Turning clearance: Allow room for the full handle sweep and the operator’s hand.
- Contact arrangement: State whether the screw fastens parts together or acts against a contact surface, and specify the required end geometry.
Application and Inspection Requirements
Potential uses include fixture adjustments, equipment stops and removable fastening points. These are application references, not an assurance of suitability for a particular force or duty cycle. Provide the operating conditions and any torque or joint-strength acceptance criteria for review before ordering.
Include thread-gauge requirements, usable length, grip dimensions, grip-to-shank alignment, joint condition and surface acceptance in the approved specification. If material reports or additional tests are required, request them at quotation stage so scope and availability can be confirmed. See our quality-control capabilities.
Frequently Asked Questions
Is this a T-slot bolt?
This page shows a cylindrical hand grip across a threaded shank, not a rectangular head intended to locate in a machine-table T-slot. Confirm your required head geometry before ordering.
Can I select a length directly from the images?
No. The images are illustrative. Specify the thread, length measurement datum and usable threaded length on a drawing or purchase specification.
What tightening torque should be used?
No torque rating is established by the supplied information. The intended assembly and its requirements must be reviewed; this listing does not provide a universal torque or clamping-force value.
Request a T-Handle Bolt Quote
Send the drawing or selected reference, material, thread size and pitch, shank length, grip dimensions, finish, quantity and delivery destination. Include any joint-inspection, material-document or performance requirements. Non-standard dimensions can be submitted for feasibility review rather than assumed available.
