stainless steel slot drain channels – AODSON stainless steel slot drain channels collect water along a narrow linear opening while keeping most of the drainage body below the finished floor. Channel length, slot arrangement, outlets and removable sections are customized to the paving build-up and drainage plan.
Product Specifications and Custom Options
| Product type | Concealed linear slot drain channel |
|---|---|
| Material | 304 or 316 stainless steel selected for water chemistry and environment |
| Manufacturing | Laser cutting, bending, TIG welding, channel assembly and finishing |
| Finish | Brushed, pickled, passivated or project-specific |
| Applications | Courtyards, balconies, pool edges, showers and commercial walkways |
| Customization | Dimensions, interfaces, finish and inspection based on drawing or approved sample |
Application and Interface Review
Hydraulic flow, channel fall, outlet size and location, waterproofing interface, cleaning access, traffic load and surrounding finish must be coordinated before production. A narrow slot does not by itself confirm drainage capacity, heel safety or load rating.
Key Product Features
- Narrow slot for a discreet floor line
- Custom channel length, depth and outlet layout
- Removable sections for cleaning access
- 304 and 316 stainless steel options
Materials and Manufacturing
Sheet is cut, bent and TIG welded into channel and cover sections. Fixtures control straightness and slot consistency during assembly. Welds, outlets and removable interfaces are inspected before cleaning and surface finishing.
The proposed route is Laser cutting, bending, TIG welding, channel assembly and finishing. Final material, dimensions, tolerances, finish and testing remain subject to the approved drawing and purchase specification.
Typical Applications
- Landscape courtyards and terraces
- Pool surrounds and balconies
- Commercial showers and wash areas
- Pedestrian paving and entrances
Quality Control and Approval
Inspection covers material, channel dimensions, straightness, slot width, outlet location, removable fit and weld condition. Flow, leakage or load testing is completed only to an agreed project procedure.
Information Required for Quotation
For a practical engineering and commercial review, please provide:
- 2D drawing and 3D model, or clear sample photographs
- Material grade and operating environment
- Critical dimensions, interfaces and inspection requirements
- Target quantity and expected repeat demand
- Surface finish, packaging and destination country
Request a quotation for this product or review related AODSON resources: Architectural Hardware, Metal Fabrication, Quality Control.
Frequently Asked Questions
Can this product be customized?
Yes. Geometry, interfaces, material, finish and inspection can be produced from an approved drawing or sample after feasibility review.
Which material should be selected?
The current options are 304 or 316 stainless steel selected for water chemistry and environment. Final selection should consider corrosion, strength, temperature, wear, installation and applicable standards.
What is needed for an accurate quotation?
Please provide geometry, material, quantity, critical tolerances, finish and delivery requirements. Application details help identify risks that may not be visible on the drawing alone.
