stainless steel glass spigots – These floor-mounted stainless steel glass spigots secure the lower edge of a frameless glass panel while preserving an open sightline. Rectangular bodies, base covers and finish options can be coordinated with pool fencing, balcony and stair-railing layouts.
Product Specifications and Custom Options
| Product type | Floor-mounted frameless glass spigot |
|---|---|
| Material | 304 stainless steel for suitable interiors; 316 recommended for pool, coastal and chloride exposure |
| Manufacturing | Casting or fabrication, CNC machining, clamp assembly and surface finishing |
| Finish | Brushed satin, mirror polished, black coated or project-specific |
| Applications | Frameless pool fencing, balcony guards, stair railings and glass partitions |
| Customization | Dimensions, interfaces, finish and inspection based on drawing or approved sample |
Application and Interface Review
Glass thickness, panel size, spigot spacing, edge distance, base substrate, anchor system, wind or guard load and local building code must be reviewed as one system. For pool or coastal exposure, 316 stainless steel and a suitable maintenance plan should be considered instead of assuming 304 is adequate.
Key Product Features
- Floor-mounted post-style glass support
- Brushed, polished and coated finishes
- Protective clamp inserts for specified glass
- Custom height, slot and base configuration
Materials and Manufacturing
Bodies and bases are cast, fabricated or machined according to volume and geometry. Glass slots, fastener holes and mounting faces are CNC finished before inserts, covers and fasteners are assembled. Finish direction and visible-surface quality are checked after processing.
The proposed route is Casting or fabrication, CNC machining, clamp assembly and surface finishing. Final material, dimensions, tolerances, finish and testing remain subject to the approved drawing and purchase specification.
Typical Applications
- Frameless swimming-pool fencing
- Balcony and terrace glass guards
- Stair and landing balustrades
- Commercial glass partitions
Quality Control and Approval
Inspection covers material, overall dimensions, slot width, fastener position, base flatness, insert fit and finish. Structural design, glass specification, anchoring and code compliance must be approved for the complete installed system.
Information Required for Quotation
For a practical engineering and commercial review, please provide:
- 2D drawing and 3D model, or clear sample photographs
- Material grade and operating environment
- Critical dimensions, interfaces and inspection requirements
- Target quantity and expected repeat demand
- Surface finish, packaging and destination country
Request a quotation for this product or review related AODSON resources: Architectural Hardware, Surface Finishing, Quality Control.
Frequently Asked Questions
Can this product be customized?
Yes. Geometry, interfaces, material, finish and inspection can be produced from an approved drawing or sample after feasibility review.
Which material should be selected?
The current options are 304 stainless steel for suitable interiors; 316 recommended for pool, coastal and chloride exposure. Final selection should consider corrosion, strength, temperature, wear, installation and applicable standards.
What is needed for an accurate quotation?
Please provide geometry, material, quantity, critical tolerances, finish and delivery requirements. Application details help identify risks that may not be visible on the drawing alone.
